The model, quantity, and accessories of the order equipment based on the contract to ensure that the stock preparation is fully matched with the order. After the production of the equipment is completed, the quality inspector is inspected by the quality inspection to ensure the production quality of the equipment to be installed. Before the equipment is packed, check out with the single -one with a single person to prevent the phenomenon of leakage and less hair. The equipment packing adopts professional packaging and modular solutions to ensure the safety and loss of equipment during the process of device transportation.
Fly ASH (Fly ASH) is also called flying ash. It is a dust collected by the chimney of the thermal power station. , Iron, Calcium, and Magnesium oxides have potential chemical activity, that is, the luminous coal ash is uniform and water mixing without water, but under certain conditions, it can be reflected with water to generate gels similar to cement gels. Concrete and have a certain strength. Because the coal powder is fine and the glass beads are formed in the high temperature process, the ash granules are more spherical. The fine ash captured from the flue gas after the coal was burned was called the coal ash, and the flour ash was the main solid waste discharged by the coal -fired power plant. The coal powder is burned in a suspended state in the furnace, and most of the combustible materials in coal coal can be burned in the furnace, and the non -combustion (mainly gray) in the coal powder is mixed in high temperature flue gas. These non -combustible materials are partially melted due to high temperature effects. At the same time, due to the effect of its surface tension, a large number of small spherical particles are formed. Under the pumping effect of the tail of the boiler, the flue gas flows with a large amount of gray to the tail of the furnace. With the decrease in the temperature of the flue gas, part of the melting fine particles are in vitate due to a certain degree of cold cold, which has high potential activity. Before the inductance fans are discharged into the atmosphere, these small spherical particles mentioned above were separated and collected by the dust collector, which was the ash. 小型超微矿渣细粉分级工艺多少钱
优明科轻烧镁立式气流分级机案例：该客户是北京一家设备公司，聚焦水泥、矿山、 In many industries such as chemical industry, electricity, metallurgy, etc., it is mainly engaged in stand -up milling and other equipment used in these industries. The customer needs to support the more suitable airflow grading equipment for its customers. ITC airflow classifier. Two devices were purchased, namely ITC450/4 and ITC450/6 devices. Product size: D80: 15 \u0026 mu; M Hours Outlet: Two 15T/H The airflow classifier of our Youmingke powder machine can be supported by the ball mill, stand milling, Raymond, Raymond Milling, mechanical grinding and other equipment, customers who need need to visit the factory to visit the experiments.
The cooperation between Youmingke and Research Institute and colleges and universities signed \u0026 ldquo; industry -university -research \u0026 rdquo; Room, carry out the horizontal union of topics, with complementary advantages, mutual benefitThe principle of common development conducts cooperation and exchanges, independently combined with science and technology research and talent training, realizes scientific research and results incubation, and promotes the effective combination of various production factors required for technological innovation.