Medical raw material crushing equipment
There are part of the crushing host, whirlwind separator, pulse dust box and other parts. The material enters the crushing room from the feeding bucket, and it crushes through the high -speed rotating hard alloy blade. The fragmentation of fineness can adjust the distance between the graded knife and the class disk to achieve the required fineness. Enter the whirlwind separator, and then, through the fans, the dust enters the pulse dust box, and is recycled after filtering through the filter tube. The material emits regular impacts with the high -speed airflow, causing the material to be shattered. Different granular powder forms different centrifugal powers in rotating air flows. The fine particles are discharged from the center of the center and entered the collection system, so as to obtain the ideal particle size finished product.
Medical raw materials crushing equipment can be set according to the batch of drugs. Some drug specifications are relatively small, which may only be hundreds of grams. Equipment to improve the collection rate and avoid greater adhesion loss to drugs. So select
Medical raw material crushing equipment to see these aspects:
1. To test the material test, the purpose of testing is to see the distribution of particle size;
2. It depends on the equipment depends on the equipment The operability of the operation is as simple as possible;
3. The degree of difficulty in seeing the cleaning of the equipment, is there any dead end;
4. The collection rate of the material;
5. Look at what happens during the crushing process. When experimenting, the more problems you find, the better, so that the purchased equipment will better meet the needs in the future;
6. Look at the crushing disk The comparison of feeding pressure and crushing pressure. At present, most manufacturers' feed pressure is greater than crushing pressure. The main reason is that they are afraid of anti -blowing. The equipment of the equipment is more concentrated in large particle size distribution;7. Select only one equipment that collects the material. At present, there are many equipment due to technical capabilities. Materials, this will cause problems with the uniformity of the material. After the crushing, the two materials must be mixed to increase the link, so you must choose only one equipment that collects the material; The pulse reverse the dust removal equipment will affect the distribution of the particle size;
9. Consider the feeding method of the material. The diameter details are greater than other nozzles, so their capabilities will be greater than other nozzles and cause the material to get closer to the position of the exit after entering the crushing disk, resulting in the appearance of large particles and a bad particle size distribution.