An inert gas protection airflow crushing classifier (nitrogen protection powder equipment) is used in metal powder, prone oxidation raw materials, flammable and explosive raw materials, pharmaceutical ultra -microcomes, and other industries and raw materials that need to be protected by inert gas. The typical materials of inert gas protection airflow crushing classifiers (nitrogen protection powder equipment) include: micro -fine spherical aluminum powder, selenium powder, cymbal iron powder, cobalt powder, tungsten powder, magnesium powder, nickel powder, pink powder, etc.
During the use of the airflow crusher, it is generally encountered in the failure of the feeding speed of the airflow crusher and the coordination of the air volume. So how to analyze and deal with these faults? The following Qingdao Youmingke Fan Machinery will explain in detail for everyone.
1. On the air flow crusher, if the export temperature is high, how should it be solved?
On the air flow crusher, if the exit temperature is high, then it must come in time in time If it is solved, if it is not resolved, it will have serious consequences, and even, it can also affect the normal work of the crusher. And its solution is very simple, as long as the air inlet is added to the air inlet, you can.
2. How should the feed speed and quantity of the air flow crusher be cooperated well?
On the airflow crusher, you want to achieve the speed and the speed and The main cooperation between the quotation is the main thing is to increase the speed of feed in properly. Moreover, in the wind gate, it should be strictly controlled so that it cannot be too large, so that the pressure inside the crusher is too large, which will affect the crushing effect of the crusher. Therefore, at these two points, it is necessary to do well, not relaxing and sloppy, otherwise, there is no good effect.
3.气流粉碎机中，其旋风分离器的底部不下料，是什么原因?
气流粉碎机中，如果其旋风分离器的底部不下料，那么，在In terms of specific reasons, there are two. One is that the inhalation of the fan is too large, so that the material is concentrated in the dust collector; the second is that there are too many adhesion materials inside the whirlwind separator, so that the separator cannot be normal. Work and operation. Therefore, it should be investigated one by one to find out the real reason to solve it thoroughly, so as to avoid the emergence of the problem again.
You Mingke Fan Machinery has always adhered to the development concept of \"we take care, only the air flow crusher\", adhering to the concept of \"quality -based, service -oriented\", and has always taken technological innovation as the breakthrough, technology, technology研发为基石，不断改进提高气流粉碎机的效率和安全性，致力于为客户提供更加安全、节能、环保的气流粉碎机产品，为客户创造更多的价值，为员工创造更大的利益，为Society has a greater responsibility.