As a super fine crushing equipment commonly used in the industry, the airflow crusher has always been famous and became the darling of the powder processing industry. The finished product of the pink material processed by the airflow crusher has the characteristics of high degree of fineness (2-54 microns), high efficiency, good decentralization, and high purity. It is very suitable for the application of high-end fields. Therefore, it is generally used in rare, valuable, and high -value -added raw materials, such as diamonds, Bai Gangyu, boron nitride, battery positive materials, and rare earth.
The airflow crusher is to compress the air through the Rawar spraying peak into the supersonic airflow and shoot into the crushed area to become darling, so Each particle has the same motion state. In the crushing area, the accelerated particles collided with each other at the intersection of each spray tori. The crushed materials are transferred to the hierarchical area, and the hierarchical wheels are screened by a horizontal layout of fine powder. The crude powder that does not meet the granularity requirements returns the crushing area to continue crushing. The qualified fine powder enters the cyclone separator with the airflow, and the dust -containing gas is filtered into the atmosphere after filtering the dust collector. In the past, the collection method of the airflow crusher was mainly collected by wet method, that is, the materials from the air flow crusher, the advanced rotor is separated to separate, and the separated materials were unloaded out of the star -shaped unloader in the lower part of the whirlwind. The unbounded material enters the spray tower with the airflow for spraying and collecting. The materials collected by the spray tower are pulp -shaped, and the air powder machine must be returned to the air powder after settlement, filtering, and drying. This process has a low acquisition rate at a time, as high as 90%, large energy consumption. At present, the collection method of airflow shredder is mainly collected by the dry method, that is, the materials from the airflow crusher, first enter the high -temperature bag filter for auto -solid separation. The current surface covering high -temperature filter material can be more than 99.5%. The separated materials are unloaded through the star -shaped unloader of the lower part of the high -temperature bag filter, and the cooling packaging is performed. The separated high -temperature tail gas is discharged from the net gas chamber of the upper part of the high temperature bag filter, and the heat waste heat recovery device is used for residual heat use. Any product will gradually be replaced with the progress of the times and the needs of the market, as is the airflow crusher. Qingdao Youmingke is the source manufacturer of airflow crusher. It is a domestic large -scale airflow crusher R \u0026 D and production base. Since its establishment of more than 20 years, the airflow crusher produced has continuously updated its technology and technology to make the products more in line with user needs. All industries at home and abroad.