The airflow crusher is different from other crushing machines. It is a crusher of the impact, friction, and shearing of the material under the collision between the particles, the impact and shear of the material, and the high -speed airflow. It has the following main characteristics:
1. Green and environmental protection: low temperature without medium crushing, ensuring the high purity and physical characteristics of the product. The device runs without dust pollution under negative pressure. 2. High -efficiency: The full use of the spray energy is to increase the crushing efficiency by 30%compared to the traditional airflow crusher, and the grading accuracy is higher. 3. Small wear of equipment: \u0026 ldquo; fluidized bed+vertical grading machine \u0026 rdquo; structure can be highly pure and ultra -narrow processing ultra -micro powder, avoiding \u0026 ldquo; fluidized bed+horizontal classifier \u0026 rdquo; The wear of the device is 20 times that of the use of the equipment under the same material. The wear is extremely small, especially suitable for ultra -micro crushing of high -purity and high hardness materials. 4. High yield: When the product with narrow granular distribution, the finished product rate is more than doubled than that of traditional spray -type and fluidized bed -type airflow crushing machines. 5. Multi -purpose: One machine is multi -purpose, which can be used as a crusher or as a classifier. The crushing particle size range is wide, and the product particle size can be adjusted arbitrarily within the range of 1-74um. 6. Intelligence: The device can achieve all automatic control, simple operation, stable operation, and excellent production environment. 7. Reasonable design: The equipment structure is compact, and there are no materials in the main engine, no dead ends, easy to disassemble and wash, disinfection, and replace the variety of crushing materials. 8. The entire system adopts automated control to achieve one -button start and stop. The operation is simple and convenient to connect with the central control to achieve remote control. As an important processing equipment, the airflow crusher needs to continuously innovate to improve product performance, improve product structure, and improve crushing particle size and purity. Studying and developing ultra -fine air flow pieces may be a good choice. The above is the characteristics of the editor introduced the airflow crusher. Welcome everyone to communicate with each other ~