The airflow crusher is suitable for the ultra-fine crushing of dry powder materials. The impact is large, which can reach 2.5 Mach or more. Generally, it is easy to crush to 1-10 microns. The airflow crusher is more suitable for the dry hair of the various raw materials of Mo's hardness 9, especially the crushing of high toughness, high purity and high -efficiency raw materials.
1. The airflow crusher and the sieve network crusher, if the use scale is compared, what are the characteristics? The airflow fan and the sieve meter, both are in the scope of the crusher. The air flow crusher passes the ordinary air from the gas source to the inert gas such as nitrogen, carbon dioxide gas, etc., which can make this machine the inert gas maintenance equipment, which is practical for crushing and grading of flammable and explosive materials and other materials. However, if you look at the scale, it is the latter, that is, the sieve network crusher, its use scale is wide. Because the airflow crusher, it stops crushing the materials within 5mm, there is certain limitations. 2. The crushing amount of the airflow crusher is related to the disposal of disposal, what is the second? The crushing and disposal amount of the airflow crusher, on these two, its related influencing elements (FACTOR), the second is the detailed usage of the crusher, and its specifications. In addition, after these, you can definitely be sure that the amount of crushing and disposal of the airflow crusher can be appropriate. 3. If there are too little feed in the airflow crusher, what will happen? And, what is the collection of finished products in the crusher? If there are too little feed in the airflow crusher, then the crusher itself will have an adverse effect. At least, the quality and consequences will be crushed. Because in the airflow crusher, it is a high -speed airflow to make the material attack fiercely collide, so as to reach the crushing consequences. If the feed is too small, it cannot be done well. As for the collection of finished products in the pieces, it is completed by the collector. 4. The particle size of the air flow is not fluctuated (explanation: stable tranquility; no change), what are the detailed reasons? If the particle size of the air flow is not fluctuated (explanation: stable and peaceful; no change), then there are two in detail, one is that the deployment configuration (deploy) Excessive, so that the particle size of the finished product does not fluctuate (explanation: stable tranquility; no change). The second is that changes are presented in operation, but the change is unreasonable or unsuitable, which will also lead to the above results. The crushing process of the airflow crusher allows the impact of the raw material itself. Unlike the impact of raw materials such as the knife head or hammer head, the machinery and equipment are crushed.