Experimental equipment is different from industrialized mass production equipment and needs to face experimental requirements for a variety of materials, or different particle size of the same material. When using operations, if there are different materials or different particle size, it is necessary to thoroughly clean the equipment to ensure that the material or particle size is not intertwined with each other, avoiding inaccurate experiments, and ensuring the objectivity of the experimental data. At the same time, experimental equipment also has a large difference in operating personnel and operating environment. The dedicated series of equipment in this laboratory is divided into four categories: laboratory air grinding (air abortion), laboratory air -flow grading machines, laboratory impact grinding, and laboratory inert gas protection crusher.
Under special circumstances, the processing of certain powder materials does not require much yield. If a general model of air flow crusher is used Investment, and the amount of feeding too small is not enough to process. At this time, the laboratory small airflow crusher needs to be used. The equipment crushing effect is the same as that of large and medium -sized equipment, but the output is small, suitable for laboratory use and small batches.
The laboratory small air flow crusher consists of the portal, material collection tank, crushing room, high -speed motor, etc., using crushed blade high -speed rotation and impact Dry materials are super fine and crushed equipment. The material is transmitted from the feed device to the crushing cavity of the host. The material and the high -speed rotary device and the particles are impacted, collided, friction, shear, squeezing, to achieve ultra -fine crushing. The crushed materials are transported to the impeller hierarchical zone. Under the action of the grading wheel clutch and the fan, the thick and thin powder is separated. The qualified fine powder is collected by the whirlwind collector. Returns the crushing cavity and grind again, and the purified gas is discharged by the campaign. The characteristics of the small airflow crusher of the laboratory: (1) Small volume and light weight. Compared with other types of crushing machines at this level, the volume is greatly reduced and the weight is greatly reduced. Especially convenient. (2) The design is clever, combining the advantages of mechanical crushing and airflow crushing. The ultra -high -speed motor is equipped with a special -shaped blade, which greatly expands the crushing range and adapts to the crushing needs of users for multiple materials. (3) Good safety performance, convenient cleaning, no need to sieve, because the full -closed structure is adopted, the operator does not directly contact the crushing room. (4) Good handling and low noise. This machine is a continuous feed formula. It can be connected to the power supply, and one person can easily operate. (5) Can be used continuously, with powerful air -cooled devices, no time limit. (6) There is no need to sieve the net, there are very few residues, and it is convenient to clean up. The laboratory small air flow crusher is suitable for various Chinese and western medicines, pearls, western medicines, chemical raw materials, food raw materials, tea, minerals, soils, food, coal, and experimental raw materials. , Ophthalmology, Dermatology, etc.
In recent years, the attention of green environmental protection and sustainable development has been mentionedThe unprecedented height, whether in the Ningde era, or You Mingke powder machinery, is constantly practicing the concept of sustainable development.There may still be infinite challenges in the future, but as a large enterprise with social responsibility, Youmingke Fan Machinery will continue to adhere to technological innovation and work with partners to achieve the unified development of economic, environmental benefits and social benefits.