At present, the airflow crusher manufacturer still stands still under economic depression. The reason is that the crushing equipment produced by the airflow crusher manufacturer is quite widely used in various industries. The manufacturing industry is basically not affected by the overall economy. However, in addition to the nature of the industry, the airflow crusher manufacturer can stand out from its own product quality and service, because the nationwide is concerned, there are many manufacturers of air flow crushing machine manufacturers. There are also fierce industry competition, so if the airflow crusher manufacturer wants to break through the siege, only by striving to improve the technical content and product quality of the equipment and improve the overall service can we strive more market share.
The airflow crusher
Relying on the high -speed airflow to make the material and the pink powder and the inner wall produce a strong collision to achieve the broken effect. The material accelerated in the supersonic nozzle, and repeatedly impacted and collided at the junction of the nozzle to achieve crushing. The crushed material enters the hierarchical room with the rising airflow. Because the grading is transferred from a high -speed rotation, the particles are not only the centrifugal force generated by the graded rotor, but also the heart force caused by airflow viscosity. The room continues to impact crushing, and the fine particles below the grading diameter enter the cyclone separator and the catcher collecting, and the gas is discharged by the campaign. The airflow crusher has the following advantages in the process of use with its principles: 1. Low energy consumption, 30%-40%energy saving compared with other types of air flow crusher; Smash work quality; 3. There is no pollution, because the material collides with collision and crushing itself under the air flow, so that the material will not form pollution during the crushing process; 4. Due to small wear , High -speed particles and wall surfaces are rarely collided, which can be suitable for shattering hardness above level nine or above; 5. Don’t heat up. Because the material is crushed in the state of gas expansion, the temperature of the crushing cavity is controlled in the normal temperature state, and the temperature will not rise. It is precisely because the air flow crusher has the above principles and advantages that airflow crusher manufacturer
stands out in the economic environment, but as a manufacturer, in the face of the current situation The development of high -end, high -end technology, and diversified sales channels can be achieved in the industry and increased competitiveness in the industry.
