Many manufacturers who want to make crushing processing processes will choose to buy a airflow crusher, but not all airflow crusher can be suitable for production and processing. The wrong processing method will make the airflow crusher wear faster. The airflow crusher is worn too fast, and the inner cavity of the crusher with a suitable material should be used when the material hardness is too large. The equipment runs for a long time with high crushing pressure. This situation requires a periodic to replace the loss of loss of loss. The crushed products are generally single peaks. If the two peaks or multi -peaks are the main reasons, there are unstable crushing pressure. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, and ensure that the minimum gas supply pressure is higher than the work pressure than the work. The feeding speed is unstable. The solution checks whether the inlet valve is blocked; whether the material is too viscous, uneven liquidity, and stable control of the feed speed. Filter cakes are formed indoors. The solution suspension of crushing work, remove the filter cake in the crusher of the cavity, and then resume production. The impact of the detection method.
The product particle size detection results after crushing the air flow crusher fail to meet the requirements, and the product particle size after the problem that will be generated after the crushing process will be generated. The test results still fail to meet the requirements of the requirements. For example, the material viscosity is large, and the material after crushing the material is easy to make a group. If the drying method is obviously inappropriate, you can consider using the wet method for detection at this time. The result is the most authentic test result. The effect of cyclone separation on the shattering effect. The crushed materials are kept at about 200-300MBAR in the pressure of the whirlwind separator. Under this pressure, you can use the packaging bag to pack the material directly at the puzzle out of the material. This situation is the best state of the whirlwind separation. If the pressure in the whirlwind separator is too large, it means that the amount of gas outlets from the shattering machine will have a large amount of gas outlet, which will affect the crushing effect. The above is the cause and solution of the air flow crusher of Qingdao Youmingke Fan Machinery for everyone. You can compare and analyze it, and then determine the usage method. Users who need to buy airflow crusher products must also call 0816-2547166 to contact us.