Domestic air flow crushing machine companies have faced many problems. For example, the size of the enterprise is too small, and the grades cannot keep up. Increase its competitiveness. It is mainly improved in the three aspects of gas source, raw material supply, and grading.
The gas source is the driving force for the crushing process of the air flow crusher. The requirements for compressed air can be kept between 0.7-0.8MPa, maintaining stability. Even if there is fluctuations, the frequency should not be too high, otherwise it will affect the quality of the product. Secondly, the quality of the gas is required to clean and dry, and the compressed air should be purified, remove the water, oil mist, and dust in the gas, so that the crushed mineral materials are not polluted. The crushing requirements are higher. The supply of raw materials is to use an enhancer to increase the raw material warehouse in the raw material, and then send the raw material into the crushing room of the airflow crusher by the infusion valve. The speed of the raw material conveyor transportation raw materials is relatively stable with the concentration of automatic control to maintain the concentration of raw materials and air mixing of the crushed chamber. There are two pairs of nozzles in the interior of the crushed indoor. When compressed the air, the supersonic air currents are formed when the nozzle is used to accelerate the raw materials, colliding with each other in the space, crushing the raw materials into ultra -fine powder, the crushing effect and the shape, distance, symmetry and raw materials of the nozzle, the symmetry, and raw materials It is related to the mixed concentration of air. The inner diameter shape of the nozzle determines the speed and distance of ZUI with the speed of the sound speed. It determines whether the raw material acceleration and speed reaches ideal. The raw material and air mixed concentration also affect the particle size and output of the product. The grading of the air flow crusher is performed by a high -speed rotation wheel. The hierarchical wheel is like a circle \u0026 ldquo; iron barrel \u0026 rdquo; the center of the bottom is fixed on the main axis of the direct -connected motor. The unprooped coarse powder enters the pipeline of the microfinage collection system from the gap, which affects the quality of the product. In order to prevent such incidents, gas sealing is performed at the gap. The leaf is installed with the side wheel, and the gap between the leaves is the channel for the sorting microfim. The crushed micro powder floats with the air flow. Due to the small particle size, the super fine powder is convenient for the gap between the leaves to enter the microfin dust collector. The larger particles are splashed behind the outer wall under the centrifugal force of the hierarchical wheel. Essence Adjust the speed of the hierarchical wheel, you can get products of different particle size.