As a high -tech equipment, the airflow crusher has outstanding advantages in diamond processing. The air flow crusher can effectively control dust pollution and prevent dust explosion during processing, so it is also a safe and environmentally friendly equipment. The processing process of the airflow crusher includes the preparation, the feeding, the crushing, and the dismissal. Each link needs to pay attention to its operation method. The specific precautions are as follows.
1. Prepare materials: Pay attention to the material must be dry. It can be equipped with various types of drying equipment). In addition, it is not crushed to contain more oils, more sugar powder, and high fiber. Then prepare the essentials such as the seasoning disk. 2. Feed: Open the upper cover (open the clockwise, turn it clockwise), and put the drying material in the crushed box. Tighten the cover and tighten the swing and fix it. 3, crushing: insert the power supply and turn on the timer switch. General materials can be used for half a minute, and hard materials can be about 1 minute, which should not be too long. 4. Material: When the rolling sound is evenly, it means that the material has been crushed into powder, and it can be turned off. The spin of the spin was fixed, the cover was opened, and the powder was poured out. The airflow crushing machine produced by Qingdao Youmingke is MQW-200, which is used for ultra-fine crushing of diamonds. 5-20 microns can be freely adjusted and the collection rate is high. How to use the air flow crusher and maintenance is the key training content of Qingdao Youmingke. For more sharing of air flow crusher, please pay attention to Qingdao Youmingke and master the industry's dynamics at any time.