What are the technical points of the Chinese medicine ultra -micro crushing machine? Chengdu Ultra -micro crushing machine manufacturers summarize the following six points for everyone:
2. Before the trial operation of each stand -alone machine, you must check whether there are metal items in the machine, if you have it, eliminate it. Whether the bolt is firm, the tightness of the belt, the reliability of the protective cover, and so on.
3. Start the stable and stable motors in the order as follows, turn off the wind door to start, and the crusher-\u0026 gt; dust collector-\u0026 gt; grading device-\u0026 gt; screw feeder-\u0026 gt; open the wind door-\u0026 gt ; Close the wind.
4. After the empty car runs for five minutes, the operator should carefully observe the various instruments on the control cabinet. After the air load current is stable, the feeding can be made. After the feeding, the current is not allowed to exceed the rated value of 32.6A, otherwise the amount should be reduced to ensure that the normal operating discharge electric electricity can work regularly.
5. You can stop according to the following order, spiral to the feeder-\u0026 gt; run for five minutes after running, the dust collector, classifier-\u0026 gt; closed aircraft.
6. Manipulating the stepless transmission handle of the classifier can change the speed of the hierarchical wheel while reaching the excellent adjustment of the product. If the particle size is required to increase the speed, the speed can be increased, otherwise the speed is reduced, and the large particle size particles are changed.
Increase investment in scientific research to promote the development of ultra -micro crushing machines towards high -efficiency and energy -saving and environmental protection.