Precautions for the use of ultra -micro crushing machines:
1. The operator should stand on the side of the feeding mouth, prohibit the inlet of the hand, and run the machine and the machine is not without the machine. Stop stabilization must not open the cover.
2. It is strictly forbidden to start the load. When the feed port is blocked, forcibly feed it by hand or a wooden stick, it should be stopped immediately. Feelily feed at work. If there is a semi -wet material, it is best to dry or reduce the amount of feeding.
The maintenance and storage of ultra -micro crushing machines
1. Regularly check the tightness of each component to prevent it from loosening and falling off and damaging the machine.
2. Each oil injection hole should be refueling frequently. The bearings are cleaned and injected once every six months.
3. When the operation is stopped, the machine should be emptied for a period of time, blows the remaining materials in the machine, and then shut down.
4. When the machine is discontinued, it should be removed from the machine, adding lubricating fat to all rotating parts, and stored in a warehouse with dry air and non -corrosive gas.
Since its establishment of Qingdao Youmingke Fan Machinery, it has formed a proprietary technical advantage in the field of powder processing equipment through cooperation with many large domestic and international high -end enterprises and scientific research colleges. There are 24 hours of online consultation hotline
0816-2547166
. You can always buy equipment purchase consulting, technical inquiry, equipment failure consulting services, etc. at any time. Welcome new and old users to call!