There are many types of lubricating oils suitable for Chinese medicine ultra -micro crushing machines. Due to the different operating speed and working environment, the label and use of lubricating oil are not the same. Correctly choosing lubricating oil is particularly important to strengthen the management of machinery. Ultra -micro crusher production manufacturer Youmingko powder introduces the choice and storage method of lubricating oil.
1. Select the types and labels of lubricating oil in accordance with the provisions of the equipment manual. General equipment manufacturers will not be very clear about the production and use of lubricating oil, and they cannot fully meet the needs in the recommendations of oil products. This requires selection in actual work.
2. Select the working conditions of the Chinese medicine ultra -micro crushing machine equipment. Machines with high friction work temperature should be used to use oil with large viscosity, to ensure the thickness of the fat under normal working conditions, and at the same time, it is necessary to ensure that lubricating oil can flow smoothly at low temperature environments; when the mechanical working speed is high, choose viscosity. Smaller oil to ensure good permeability and liquidity. If the oil is too thick at this time, it will increase the resistance; when the load is relatively large, the oil should be used to ensure the thickness of the oil.
The purchase and storage of Chinese medicine ultra -micro crushing machine lubricating oil
1. When choosing lubricating oil, it should help its physical properties and chemical properties, such as viscosity, such as viscosity , Flash point, corrosion resistance, etc., also combined with the manufacturer's instructions, and under the premise of considering comprehensive benefits and conducive to management, minimize the types and labels of oil as much as possible to reduce financial costs.
2. The storage and storage of Chinese medicine ultra -micro crushing machines plays an important role in the performance of oil. Lubricating oil will oxidize when contacting with non -ferrous metals, which will affect its performance and corrosion damage machinery during use. Therefore, in storage, you should avoid contact with non -ferrous metals such as copper. The barrel oil should be kept clean, ventilated, and avoiding light. The storage time of lubricating oil should not be too long, so as not to affect the effect.