Airflow mill manufacturer introduces that gas flow mills are very common in some non-metal industries, because gas flow grinding can uniformly uniform, its particle size distribution is not only narrow, but also the surface of the particles is also very smooth. And the shape of the particles is also very uniform, and there will be no strange shape.
The lithium hydroxide gas flow pulverizer is a purity 99.95% nitrogen as a gas stream pulverizing abrasive medium, which realizes the ultrafine pulverization of the material, which is mainly compressed, gas storage tank, silo, pulverized host, whirlwind separation. Composition of a dust collector, an automation control system.
When the lithium hydroxide gas flow pulverizer is operating, the system is turned on by nitrogen, and the air is replaced in the system until the full system reaches the value of the oxygen content test, then The automatic start feed device minifes the raw material to the pulverized chamber compressed nitrogen by specially designed supersonic nozzle to accelerate in the ultrasonic spray stream, and repeatedly impact, collision, collision in the nozzle intersection Crushing effect. The pulverized material enters the grading chamber with the rising airflow to meet the requirements of the fine particles enter the grading wheel with the gas stream, and the material returning the grading wheel will continue to impact the pulverized, and the filtered pure gas returns the compressor. Inhalation port cycle
Lithium hydroxide gas flow pulverizer not only applies the principle, but also has a number of performance characteristics:
1) Strong applicability, depending on the activity of active, easy oxidized materials, can be adapted Gas is used as a pulverized medium.
2) The inert gas is used to consume very small.
3) The error of the purity of inert gas can be controlled at 1 ppm and the oxygen content can be arbitrarily set.
4) Small wear, due to the main crushing effect, material particles are impact collisions, which can be applied to the material of the crushing Moqi hardness.
5) The pulverized particle size range can be arbitrarily adjusted, and the range of D50 = 3-8um is arbitrarily selected.
6) The system uses advanced touch screens, plus programmable PLC controllers, fully realizing automatic control, reaching automatic unmanaged operation.
Shandong Erfa production of lithium hydroxide gas flow pulverizer model is MQW-200 type, the same type there is also a model of different yields, the lithium hydroxide gas flow crusher of Erfa is actuallyAfter the application, it shows that its advantage is highlighted, and it is well received by the user and has higher visibility in the industry.
Strengthening environmental protection and reducing climate change risk is the necessary conditions for enterprise development, all the awareness of AlPA has from the perspective of creating a beautiful environment, abide by the "green development, environmental priority", As the power source, the industrial waste is used as a power source, which is a circular economy solution for high value-added integrated use of high value-added industrial solid waste in fly ash, slag, steel slag, tailings, poisters, pool mud.