The medicinal hammer-type Hammer Mill utilizes the relative high speed of the active gear and the fixed tooth pan, so that the crushed material is hit, friction and the material collide with each other. The crush can be discharged directly from the grinding chamber. After the expenditure, the general material is smashed, and after the cotton bag is collected, the crushing material is collected in the bag, and the air is from the small eyelet of the bag, will not The fine powder is discharged, thereby causing no waste, non-pollution. The machine has a federous, pulverized hammer, a tooth plate, a crushing motor, a blade, and the like. The material is subjected to a pulverizing chamber by the addition of the feed, and the high-speed rotating hammer is pulverized, and the fineness can be adjusted at will, and the high-speed rotating paging puts the required material from the pulverizing chamber into the pocket, and does not meet the required material to continue in the pulverization chamber. Medium crushing. This machine complies with GMP certification standards.
(1) High fineness, fast speed, the series models use small ultra-high speed motors, Strong power guarantees the fineness and speed.
(2) Small size, light weight, compact structure, no vibration, no need to fix, thereby ensuring that it can be used freely at any occasion.
Good safety, no dust, small loss, easy cleaning, because the series model is intermittently pulverized, the pulverization chamber is a fully sealed stainless steel tank structure. To ensure the implementation of the above performance.
(4) Applicable range, plant fiber, high hardness, high toughness materials, such as medicinal materials, inorganic, minerals, etc. can achieve good crushing effects.
(5) Good manipulation performance, fineness can be arbitrarily adjusted, since it can be opened, shutdown operations, so that the control fineness is achieved by controlling the length of the pulverization time.
Medicinal hammer-type Hammer Mill smashing time is not shorter, it is not, the longer the better, in order to help you achieve more ideal crushing effect, we will classify different materials It is recommended to use different pulverization methods to better results. CrackingWhen the type of material is a fibrous structure, it is unable to pulverize the powder, which is generally related to the material itself of the material itself. When commissioning this type of material, the interval is pulverized, every 10 seconds is separated; similar to crushing materials such as: iron column maple, Ganoderma lucidum and so on. When pulverizing the grease material, it is recommended to interval, stop once for 10 seconds per powder (about 5 seconds), check the crushing effect, until satisfaction, the machine is hot, it is easy to be confused, the effect is not good; Materials such as: sesame, peanuts, walnuts, flax, linen, sunflowers, etc. Crush completion. When the set time reaches the calculus, there is no style with the time switch, it is necessary to master the time. Generally, when the rolling sound is relatively uniform, it means that the powder has been powdered, that is, it can be shut down. After the pulverization is completed, the machine is turned in 2 minutes and the remaining material is pumped. After the stop, open the cover to check the parts without damage, remove the remainder, turn off the cover.