Today, my country's herbal medicines have gradually developed, and the grinding herbs has also become a major work. The medicinal material hammer Hammer Mill is strong. It is polished stainless steel, and Hammer Mill is durable, and there are fewer consumables. Economic cost. Chinese herbal medicine Hammer Mill motor bearings use foreign names, consumables only one blade, with special steel, with advanced razor blade homogeneous. The fineness can be adjusted at will, and the high-speed rotating blade will be taken from the crushing chamber from the pulverization chamber, and the material does not meet the required material twice automatic pulverization.
Maintenance DescriptionAccording to the frequency and time of the machine, the oil should be added to the oil cup of the bearing housing in the oil cup of the bearing, 5-10 times per month. If you work for more than 12 hours a day, you need it every day. Add lubricating oil once. If the incaspatition should be turned on, replace it in time, timely replacement, ensuring production and other machines, blades, and lining should often check the wear situation. If wear is lowered, the particle size is thick, the cavity is heated, and it should be replaced in time.
At any time, you should pay attention to the operation of Hammer Mill, and the feeding should be uniform, to prevent blocking bulls, do not have a long time overload. If you find vibration, noise, bearing and body temperature is too high, to the outer spray, etc., should be closed immediately, and the trouble can be eliminated.
HM hammer Hammer MILL housing surface overheating has the following three cases
1, the load is too large;
2, the motor is moist;
3, the power supply voltage is too low.
So knowing the reason, how do we solve it? We use several words in order to solve the above three questions.
1, the load is too large, we will reduce the working pressure of the medicinal hammer Hammer Mill; this will solve it naturally;
2, the motor is wet, this is more simple, using ventilation Or blow drying, the motor is dried;
3, the power supply voltage is too low, just correct the power supply voltage.
How is it well resolved? In fact, it is not very difficult to use medicinal hammer Hammer Mill.