Ultra-micro gas flow grinding is to overcome the internal cohesive force of the solids in the internal cohesion of the solids by mechanical or fluid power, thereby pulping 3 mm or more of the material particles to 10-25 microns. It was a high-tech of a material processing that was generated by the development of modern high-tech after the 1970s.
Regularly check the fixing nut of the active tooth disc of the airflow pulverizer, whether there is looseness and all the fastening components must not be loose. In particular, it should be checked in the fixed tooth disc. Where there is an oil cup, the appropriate lubricating oil is injected before the power is turned on. For continuous work, the number of refueling is applied, and the actual work is more than 300 hours, and the new lubricating oil must be replaced after the main shaft bearing cavity. The material enters the cavity is tightly frozes and strongly impinges on the inside of the blade of the turbine, and grinds again in the slit between the blades and the mill. At this crushing, while grinding the material, the turbine sucks a large amount of air, and these gases play a cooling machine. The front cover of the machine must be opened after the stop, facilitating the cleaning of the machine, ensuring that the machine work surface is clean, and the pulverized material can be discharged directly in the machine abdomen.
The thickness of the degree of pulverization can be realized by different aperture screens. After the installation and commissioning of the machine, the machine must be stable after position, and the ground screw is fixed, before the trial The inner cavity of the airflow mill should be cleaned, and the front cover is locked with a star handle. After the power is turned on, pay attention to the order, so that the spindle is rotated in the direction shown. When testing the car, you should pay attention to whether the machine has abnormal noise. In order to park check in time, the storage bag is installed in the air. Since the nozzle designed in the pulverization mode is parallel along the inner wall of the pulverized cavity, the symmetrical arrangement is only formed in a single plane, so that the material to be pulverized can only be pulverized in the range of an approximate plane.
To reduce customer pre-investment, reduce project investment risks, improve product competitiveness, and ALPA provides customers with processing services to meet customers' diversification needs. Can be processed by battery materials, environmentally friendly desulfurization, building materials and solid waste, non-metallic mines, pharmaceuticals, food / cosmetics / health products, fine chemicals, powder metallurgy, high-tech materials, and other materials.