Under the current environmental protection trend, airflow crusher is a very popular processing equipment for many Chinese medicine companies. In this regard, from the beginning of the manufacturer, the environmental protection of the air flow crusher considers the airflow crusher. The production line can be continuously produced. The entire system is operating negatively in a negative pressure, which effectively prevents the dust from the dust, makes the working environment dry and clean, and fully meet environmental standards.
It is a more common way to use airflow crusher to produce ultra -fine powder, but there are many security problems in the use process. Without sufficient attention, it is not conducive to the personal health and safety of the operator. Therefore, it is necessary to understand its working principles, find out hidden safety hazards, and carry out in -depth safety protection and management. The airflow shredder can form a high -speed airflow trajectory in the crushing room by using the pressure of compressed air by the supersonic nozzle installed around the crushed room. This supersonic spraying airflow makes the powder be impacted, shear, compression and other effects. The powder produces fierce friction with each other. When the external stress is greater than the internal stress of the particles itself, it can achieve the purpose of crushing. Due to the centrifugal force in the crushing room, it can achieve the role of powder grading. According to the working principle and actual operating experience of air flow sample samples, the main safety problems involved in the process of fragmented samples are dust hazards. According to relevant information, the crushing limit of the airflow crusher is about 0.5 \u0026 mu; m. The reason is that the crushing process is the result of the expansion of the internal defect expansion under the action of external forces. At the beginning of the crushing, the original micro -crack inside the particles expands under the action of stress, the crack size is large, the critical stress required is small, and the crushing effect is the most obvious. As the crushing process is carried out, the powder particles are getting thinner and thinner, the cracks or structural defects inside the particles are getting smaller and smaller, which prompts the stress required for crack expansion to become larger and larger. Trends to reach the limit. Therefore, at the beginning of the design, the air flow crusher considers its environmental protection. Under the current environmental protection trend, the air flow crusher has become a favored processing equipment for enterprise ZUI. During the whole crushing process, the airflow crusher is in a full confidential state. There is almost no dust generation in the production process. There is no pollution in the operation workshop, no dust, which fully meets national environmental protection standards.