The ultra -fine crushing equipment industry used in glass micro beads generally uses airflow crushing machines. In the market, there are many cases of MQW airflow crusher produced by Qingdao Youmingke for glass micro beads. After practical application, the MQW airflow crusher is high in the processing of glass micro beads. Processing method.
Due to the characteristics of the airflow crusher, the particles collide with each other, and at the same time the rubbing between the particles, so that the particle tip corner of the corner corner is Smooth provides favorable conditions for the control of glass powder. Materials are crushed by supersonic air flow, and they are almost not brought into other impurities. It avoids the secondary pollution of the crushing equipment on raw materials and can effectively ensure the purity of the product. The airflow crusher splits the high -speed airflow and the material into the crushing room, avoiding the collision and friction between the particles and the pipeline, and greatly reduces the wear of the nozzle and pipeline. Crash, friction, and reduce the wear of the granules to the cavity; the particles that are required after crushing can be separated in time, greatly reduced the crushing and improved the energy utilization rate; Integration and improvement of efficiency. The airflow crusher produced by Qingdao Youmingke, the efficient collection efficiency of its own design, has a collection efficiency of 99.9%, avoiding waste caused by small particles that cannot be recycled, and it is of practical significance for glass micro -beads with higher value.