The temperature of the laboratory airflow crusher will not rise when it is crushed, it will not rise, it is very low, the production cycle is also very short, the feeding rate is also very high, the granules are uniform, the laboratory airflow The crusher gradually becomes a powerful assistant in the process of pharmaceutical crushing. According to a certain understanding, when the temperature of the working quality is constantly rising, the flow rate of the gas will also drive the speed of the flow rate, mainly taking air as an example.
The airflow crusher of the ceramic lining laboratory is mainly composed of feeding device, crushing room, discharge port, steam distribution tube and nozzle. It is based on the physical characteristics of the material and the purity requirements of the finished product. Inside the device lines with ceramic sheets, increase wear resistance, reduce the impact of materials on the equipment, increase the service life of the equipment, and accurately control the iron content of the material during the crushing class. Essence Successfully solved a series of problems such as battery material adhesion, inadequate, and inaccurate grading.
The airflow crusher of the ceramic lining laboratory has the following performance advantages:
1. Suitable for crushing of high hardness, high purity and high value -added materials.2. The breakthrough of the granular acceleration technology has greatly improved the crushing efficiency, reduced energy consumption, has a small crushing, good particle size, narrow granular distribution and no large particles, product particle size D97 \u003d 3-74 Ren adjustment between microns.
3. During the crushing process, the air flow temperature was reduced due to the sharp expansion of the air flow, especially suitable for the crushing of thermal, low melting points and volatile materials.
4. The material collisions with each other, different from the crushing of the impact on the material by mechanical crushing by the blade or hammer head, plus a comprehensive ceramic lining, so the equipment wear is small and the product purity is high.
5. It can be used in series with multi -stage airflow class machines to produce multiple granular segments at a time.
6. Ceramic inner lining laboratory air flow crusher equipment has a compact structure, easy to disassemble and clean, and the inner wall is smooth without dead ends.
7. The whole system is fully negatively closed and closed, no dust, low noise, and clean and environmentally friendly production process.
8. The dust collector uses \u0026 ldquo; You Mingke powder machine \u0026 rdquo; special anti -adhesive dust collector technology, which eliminates problems such as low pressure and adhesive machines.
Under the strong advocacy of the country, \"green sustainable development\" is the main direction of the development of major enterprises. While practicing intelligent manufacturing, it has been fully implemented in green manufacturing, which has long been the top priority of the development of Youmingke powder machinery. You Mingke Pink Machinery Practice the concept of green manufacturing, and fully builds enterprises into a model for the transformation and upgrading of traditional manufacturing.