After the factory installation is completed, the operator will read the product in detail before the production operation, understand the structure of the structure of the structure, and the working performance of familiarity and crushing machine. examine. At the same time, the following work in strict accordance with the operating procedures also keeps in mind the following:
(1) The grinding motor plant is sealed, the coupling has been modified, please do not loosen; [ 123]
(2) The permanent magnet and the permanent magnet board of the iron impurities are regularly cleaned;(3) Check the fineness of the product's grinding;
(4) Clean up Or replace the filter bag fixation (ensure the ventilation of the bag), and check the working situation of the solenoid valve regularly (see if it can work normally);
(5) regularly check the wear of the factory parts to see if it is normal wear; (6)经常注意振动磨; (7)锤头磨损需要更换时，应注意称量，保证两个相对的(1800个方向)相对锤销轴两The weight deviation of a hammer \u0026 le; 1G and two relative (1800 directions) of the hammer sales deviation \u0026 le; total weight of 2G;
(8) Sieve network wear is seriously required to be replaced, you should pay attention to the new, you should pay attention to the new, you should pay attention to the new. The grid is smooth and the sieve is reasonable. The installation is in place. Try to use the hair surface of the screen during installation;
(9) the leaves should be adjusted to the material of the feeder;
(10) If if The abnormal situation of the grinding machine and the abnormal noise should be stopped immediately;
(11) The main shaft bearings should be added with 80 grams of butter 40 hours, but only 60 %. The lower bearing cover, replace all the grease with lubrication. When the fresh lubricant bearing ring, and the surrounding oil, add 1/3 ~ 1/2 to the bottom box, do not add too much oil;
[12] (12) Factors removing raw materials should focus on checking whether the wind door is in place, whether it is leaked, the pulse bag is blocked, the solenoid valve, and the fan is working normally.