The use of airflow crushing machines for product production and processing at the current stage of most product production and processing is one of the very common processing methods of processing and production, but the technology of continuously increasing the technology of shattering equipment is also replaced by the continuous improvement of crushing equipment. Inflothing.
The performance and internal configuration of the crushing equipment of the airflow must also keep up with the trend of the times to continuously upgrade the product and the introduction of cutting -edge technology to maintain the advanced equipment productivity. Sex can make equipment better meet the needs of different production methods for customers.
So what kind of operating skills do we have in the process of using this crushing device? Qingdao Youmingke came to make a detailed introduction to the strike:
1. Check whether there are in the crushing cavity. Foreign objects must be empty before booting. Tighten the butterfly nuts of the upper cover and crushing cavity.2. Start the motor, turn the aircraft for 1-2 minutes, and then gradually feed the material from the feed plate. The feeding should not be too fast. If the material is stuck and the motor does not turn, please turn it off immediately to avoid the motor burned. After removing the ingredients of the card, you can continue to use it.
3. During the use process, it is strictly forbidden to open the upper cover and reach into the crushing cavity with your hands. Please replace different sieve networks according to the need. Using overheated protectors, if the motor load is too large, it will be stopped automatically. If you continue to operate, please press the protector again.
4. During the work, the current must not be greater than 15 amp.