What are the matters to be noticed in the operation of the crusher? The manufacturer of the airflow crusher is requested below:
2. Select the speed according to the main axis, and you cannot increase the speed of the main axis independently.
3. The material cannot be mixed in the material, which will cause damage to the machine.
4. When the feeding, you must stand on the side of the material mouth. You cannot push the feeding with a stick.
5. The temperature should not exceed 55 degrees during mechanical work.
6. Clean up the collection bag in time because it will have an impact on production.
7. If you want to replace the parts such as hammer, clean the block, and you must do it under the condition of the power supply.
8. If it is an open -air operation, the operation is over, the interior of the machine is needed, and it is necessary to prevent waterproof fire.
People under the age of 9.16 and over 55 years of age cannot operate machinery separately.
10. In order to extend the use time of the machine, do not use inferior hammer films.
11. If a failure occurs at work, be sure to disconnect and repair.