The crusher is very widely used, and it has important applications in many industries. So what do you need to pay attention to when operating the crusher? Let's tell us the manufacturers of the air flow crusher.
1. Be careful before the operation to read the instructions to understand the sexuality and structure of the equipment.
2. The speed of the main axis cannot be increased, and there must be no hard blocks in the materials, which will cause damage to the equipment.
3. On the side of the material, to prevent the material from flying out.
4. The bearing temperature should be below 55 degrees, and the equipment is too hot to park for viewing.
5. Clean up the materials in the material bag. When replacing the hammer, open the case to clean up the blockage, and cut off the power.
6. After the work is over, the equipment must be cleaned up, and waterproof fires should be made.
7. Persons who do not understand the equipment or after drinking and the diseases are unable to operate.
8. Do not use inferior hammer tablets, which will affect the use time of the device.
9. If there is a failure, check the power out.
10. There must be a protective cover during the equipment work, and the equipment must be viewed before booting.