After a long period of use, the airflow crusher needs to be cleaned. Before cleaning the airflow crusher, all such a machine should be removed, and the disassembly skills are also very good.
When cleaning, you can turn off the total power supply, and you can directly remove the remaining dust in the machine with the brush. Be sure to clean it layer by layer.After removing the feeding bucket, you can remove the four screws on the base first, and then remove the furnishing bucket.After removing the sieve network, you can directly open the airflow crusher door, and then sieve.
After removing the gear, you can loosen the tightening nut, and then separate the living teeth from each other from the main axis.Then remove the active gear and place it safely.Remove the fixed gear, remove the screw, and remove the fixed gear.Be careful when removing the airflow crusher, and you must not cause any damage to the machine's parts.