The airflow grind is a fine equipment. The details of the use and maintenance should be paid attention to:
1. The airflow grinding a protection measures before the factory. No technical personnel can not change the internal parameters of the airflow milling, so as not to cause the equipment to be damaged. There are high voltage during power off. Pay attention to the occurrence of electric shocks when opening the cover.
2. After an accident occurred, there must be technical personnel for maintenance, not for private maintenance to avoid operating errors. The airflow grinding mobilization component to select the consistent component of the parameter.
3. The airflow grinding host equipment and electronic control cabinet must be grounded.
4. The filter element of the airflow dust collector is in a dry state. Damage in the filter bag is discharged from the discharge of the discharge fan. To test or mobilize the filter element on time, check the pulse valve and other pneumatic components. Essence
5. The airflow grinding raw materials should be dry to the raw materials to avoid blocking the filter bag. The water content should not be greater than one percent.
6. The airflow grinding gas source is removed through drying and purification, eliminating moisture and impurities to prevent the moisture and damage of internal electrical components.
The above is the details that need to be paid attention to when the air flow is used. When installing and producing, you can contact us at any time when you encounter problems or difficulties.