The airflow crusher is no stranger to many people, but sometimes we will have a strong vibration when we use the airflow crusher. What is the reason why you know? Let's take a look together.
1. The spiral addter is loose, and the vibration phenomenon occasionally occasionally occurs when the airflow crusher runs. The screws on the components are not reinforced. After this phenomenon appears, check whether the device is installed correctly.
2. The nozzle is not tight, and the nozzle is a key part of the material collision with each other. If there is a problem with the installation of the nozzle, it will cause a strong vibration of the machine, resulting in errors in the production process. The problem of the series will even contaminate the materials.
3. Bearing and spindle damage, the main shaft and bearings have not been replaced for a long time. As a result, the accessories are worn. It is a general factor in the vibration of the machine. It should be replaced immediately and tightened.
In addition, the airflow crusher manufacturer reminds us that in order to reduce the occurrence of equipment failure, a series of measures must be taken.
1. Due to the high -speed operation of the airflow crusher, in addition to the correct and firm installation, it is necessary to maintain a good lubrication to maintain the normal operation of the machine. Under normal circumstances, the temperature of the bearings does not exceed 70 degrees.
2. Keep cutting evenly during the production of airflow crusher to ensure crushing quality and normal production. At the same time, the motor is strictly prohibited to avoid damaging the motor due to overload operations.
The above is this content, I wish you a happy life.