The airflow crusher and the separator, the dust collector, and the induction of the air are forming a whole set of crushing systems. After the air is filtered and dry, spray the crushing cavity at a high speed through the nozzle, and crushes under the friction of the high -pressure airflow. The required particles enter the dust removal collector, and the technology that does not match continues to crush.
The manufacturer of the air flow crusher explains the introduction of the air flow crusher.
1. Use range
It is suitable for the drying method of various materials with a hardness of 9, especially suitable for high hardness, purity and ultra -fine materials.
2. The granularity of the feed
above 30 mesh, the higher the raw material, the higher the output.
3. Feed method
① The MQW03 type uses a closed material warehouse+frequency conversion spiral control+the feeding method of power transmission.
② Mqw06 or more uses material warehouse+frequency conversion spiral control+dual -qi -moving butterfly valve feed method, quantitative controllable.
4. Methods
Install the electric unloading valve, pneumatic butterfly valve, and manual butterfly valve according to the demand.
5. Production quality
There is almost no pollution to the raw materials. Adding ceramic slices inside the equipment can extend the service life of the equipment.
6. Working environment
There are no special requirements for the workshop, there is no dust and pollution at the scene.
7. Temperature control
The airflow crusher has a constant temperature control effect, temperature \u0026 le; 25 ℃.