The fluidized bed air flow crusher can be placed in the middle space of the crushing room due to the crushing and the gas flow of the shock, and avoiding the impact of the wall surface driven by the high -speed airflow when crushing. Severe wear problems and greatly reduce the possibility of contamination of materials.
It uses protective gases such as high -purity nitrogen or pheasant as the working medium, mainly to place oxidation, and closed -loop round gas Small consumption and reduce costs. It is completely in a closed -loop operation process without dust flying. There is any pollution for the environment, and there is no harm to the human body.
The activity of the powder of the fluid gas flow crusher of the fluidized bed is also increasing. The ability to summarize the high -speed jets in the process of processing is not only possible to make the particles impact and damage, but also it will also be able to damage the particles, but also it will also be damaged, but it will also be damaged, but also will also be damaged. Internal tissues inside the particles, especially the surface state, have changed a certain degree of changes. All atoms or ions are removed from the granular lattice, which causes mechanical loss of the crystalline tissue. Whether the surface of the particles can increase, and the activity of the particles is constantly improving the energy of the speed jet flow, which not only can break the particles of the particles, but also the internal tissue of the granules to mention the surface state, which changes a certain degree of changes. The airflow energy removed several atoms or ions from the granular lattice, causing mechanical losses of the crystal tissue. While the powder material is super crushed, the surface of the particles can also be increased. It is also constantly increasing, not only conducive to chemical reactions, but also very conducive to adsorption, envelope, etc.