We all know that the airflow crusher belongs to a relatively precise mechanical equipment. The use and maintenance in daily life have a lot of details waiting for operation. The efficiency of the machine, so it is necessary to check whether the raw material meets some of the current requirements in the process of production. At the same time, there are also some foreign bodies in the raw materials. When necessary, you still need to eat a certain amount of materials. In the case of the non -changing flow of the gas, the materials in the grinding cavity are not continuously increased, and the classification of the classification is too large. At this time Gradually decrease, the current of the classifier becomes smaller. In addition, the feeding speed must be kept evenly and stable, and it cannot occur too fast or too slowly. In this way, the device will be seriously overloaded.
The airflow crusher needs to be maintained regularly for equipment, and at the same time, it is necessary to check whether the pressure supply pressure on the equipment has reached the pressure required for crushing. And the hierarchical clicks of the airflow crusher. The equipment runs after 3000 hours, or after a long -term shutdown of long -term shutdown, then re -boot start. It is not applicable for a long time. The grinding cavity in the nozzle and the material on the internal grading part are mainly to prevent the crushing effect of affecting the air flow crusher.
The airflow crusher needs to notice these environments to ensure that the airflow crusher has been working efficiently for you.