In areas where they are developing fast, many people have already understood the airflow crusher, and the crusher technology is in an absolute leading position in the industry.
The difference between the super micro crusher and the ordinary crusher: Ordinary crushing machines can generally only be crushed to 200 meters, 200 meters of 75 microns. It is the size of flour. Ordinary flour is about 80 meters to 160 mesh, which is 90 to 180 microns. This is the thickness of the normal crushing function. Ultra -micro crushing machines can be super crushed, which can be crushed to 10,000 mesh. 10,000 mesh is 1.3 μm, which is equivalent to the particles with flour and then crushed to 70 copies. This is very thin.
The airflow crusher can be used in series with a multi -class crusher, and it produces multi -particle -size products at one time. The device is easy to disassemble, the inner wall is smooth, without dead ends. The entire system is closed and crushed, less dust, low noise, and clean and environmentally friendly production technology. The control system uses program control and is convenient to operate.
Case Sharing of the Mindo quartz powder airflow crushing machine: a new material company is a high -tech enterprise engaged in electronic -grade silicon microfan production and research and development in China. The company has a number of silicon micro -powder production lines, with a variety of specifications such as crystal crystalline silicon micro powder, melting silicon powder, and surface treatment of silicon microfan. The company has always adhered to customer -centric, and the needs of customers quickly responded and continued to innovate. It is committed to becoming a supplier of the industry's leading powder material application solution. We continue to innovate around the needs of customers and open cooperation with partners. We are committed to providing competitive solutions and services for electronic materials, electrical insulation materials, special ceramics, precision casting, paint coatings, and other functional applications to create value for customers. Case parameter: product particle size: D97: 5-75um Hours: 20-100kg
Correct use of ultra-micro airflow crusher: 1. Ultra-micro crushing machine and power unit should be installed firmly. If ultra -micro crushing for long -term fixed operation, it should be fixed on the basis of cement; if the crushing machine is a mobile operation, the unit should be installed on the seat made of angle iron and ensure that the power machine (diesel engine or electric motor) and the crushing machine The belt wheel groove is in the same rounded turning plane. 2. After the pieces are installed, check the fastener of the fasteners of each ministry. At the same time, check whether the belt is loose tightening. 3. Before starting the crushing machine, rotate the rotor by hand to check whether the tooth claws, hammer sheets and rotor operation are flexible and reliable, whether there is a collision in the shell, whether the rotation direction of the rotor is consistent with the direction of the machine arrow, the power machine and crushing Whether the machine lubricates is good. 4. Do not change the strap wheels casually to prevent the crushing room exploded by excessive rotation, or the speed of the speed affects the work efficiency of the crusher. 5. After the crushing machine starts, it should be carried out for 2 ~ 3 minutes first, and then the feeding work after no abnormal phenomenon. 6. Pay attention to the operation of the pieces at all times at work, The feeding should be uniform to prevent the stuffy car, do not work over a long time.If there is a phenomenon such as vibration, noise, bearing, and the temperature of the body, the outward spray is stopped, and it should be stopped immediately to eliminate the failure before working.
Breakthroughs in key technologies such as crushing machines, classifiers, and key technologies independently developed by Youmingke, as well as key technologies such as plastic surgery, covering, and modification, breaking the barriers of foreign technology, filling the gap in the domestic industry, and greatly promoting medicine and food, Chemical, minerals, new materials, solid waste treatment and other fields of technological progress and industrial upgrading.He has won honorary titles such as the Ministry of Science and Technology's \"Technology Innovation Fund for Science and Technology SMEs\", \"First Batch of Gazelle Enterprises in Shandong Province\", \"Shandong Provincial Hidden Champions Enterprise\", \"High -tech Enterprise\", \"China Patent Shandong Star Enterprise\" and other honorary titles.
The above is the relevant content of the airflow crusher.The company has always followed the standardized management and provides the product and service of the first production and service policy of the first production and service.